Zooz Z-Wave Long Range Relay for Home Automation | Compatible with Awnings, Garage Doors, Sprinklers

Quick Product Breakdown

SMARTEST RELAYS FOR YOUR SMART HOME

Control 2 dry contact relays independently with one Z-Wave device. Choose between normally closed (10 A) and normally open (20 A) relays to automate almost any electrical device.

EASY INSTALLATION AND CONTROL

• Connect an optional wall switch for physical on/off control.
• Use a Z-Wave hub (required, sold separately) for wireless control.
• Your smart speaker is NOT a Z-Wave hub, so connect this device directly to your hub.

SMART INPUTS FOR AUTO-REACTIVATION

Monitor 12-24 V or dry contact inputs separately from the dry contact outputs. Connect analog binary sensors to receive status updates. Use the inputs to trigger the outputs automatically.

AUTOMATE YOUR HOME AND GARDEN

• Add Z-Wave connectivity to your up/down DC motors in screens, motorized blinds, or awnings.
• Perfect for automating your garage door opener (use a single ZEN17 to control up to 2 garage doors independently).
• Suitable for commercial gates, gas fireplaces, sprinklers, doorbells, outdoor lighting, pool pumps, whole house fans, and any 1-240 V device up to 20 A.

SIMPLE AND SAFE INSTALLATION

• Power it with a 12-24 V AC/DC power source or a standard USB C cable (included) and a power supply (sold separately).
• Wall-mount ready. Jumper wires NOT included.
• Do NOT power with 110 V.

LATEST Z-WAVE TECHNOLOGY FOR RELIABILITY AND SECURITY

• Enjoy better signal coverage and a stronger Z-Wave repeater with the latest 800 series chip.
• Long Range ready if your hub supports this feature.
• Comes with S2 authenticated security and SmartStart for easy pairing.
• Remembers and restores on/off status after power failure.
• Built-in auto-on and auto-off timer available if your hub supports advanced settings.
• ETL certified and conforming to North American safety standards.

COMPATIBILITY

This is an advanced Z-Wave device and it requires an open Z-Wave hub to display correctly. It was tested to work well with Hubitat, Home Assistant, and HomeSeer (on 3.0.6.0 Z-Wave plug-in or higher). Compatible with SmartThings with a custom device handler (please go to Zooz support page for details). NOT supported by ADT Pulse, Vivint, Wink, Ring, or Alarm.com.