ZOOZ Z-Wave Long Range Relay ZEN17 for Smart Homes Requires Hub

The Lowdown On Features

Smart Outputs

Control 2 dry contact relays independently with one Z-Wave device. Choose from normally closed (10 A) or normally open (20 A) relays to automate almost any electrical device. For physical on/off control, connect an optional wall switch. For wireless control, use a Z-Wave hub (required and sold separately). - Dry Contact Relays: - Normally Closed (10 A) - Normally Open (20 A) - Control Methods: - Wall Switch: For physical control - Z-Wave Hub: For wireless control

Smart Inputs

Monitor 12-24 V or dry contact inputs separately from the dry contact outputs. Connect analog binary sensors to receive status updates in your Z-Wave hub. Use the inputs to trigger the outputs automatically. - Input Types: - 12-24 V - Dry contact - Sensors and Devices: - Door sensor - Water sensor - HVAC system - Alarm panel

Automate Anything

Add Z-Wave connectivity to devices like up/down DC motors in screens, motorized blinds, or awnings. Perfect for automating garage door openers, commercial gates, gas fireplaces, sprinklers, doorbells, outdoor lighting, pool pumps, whole house fans, and any 1-240 V device up to 20 A. - Devices Supported: - Garage door opener (up to 2 doors) - Commercial gates - Gas fireplace - Sprinklers - Doorbells - Outdoor lighting - Pool pumps - Whole house fans - Any 1-240 V device up to 20 A

Quick Installation

Power it using a 12-24 V AC/DC power source or a standard USB C cable (included) and a power supply (sold separately). Wall-mount ready. Jumper wires are not included. Do not power with 110 V! - Powering Options: - 12-24 V AC/DC - USB C (included) - Power supply (sold separately) - Installation: - Wall-mount ready - No jumper wires included

Newest 800 Z-Wave Chip

Enjoy better signal coverage and a stronger Z-Wave repeater for your mesh network with the latest 800 series chip. Long Range ready if your hub supports this feature! Comes with S2 authenticated security and SmartStart for easy pairing. Remembers and restores on/off status after power failure. Built-in auto-on and auto-off timer available if your hub supports advanced settings. Device is ETL certified and conforms with North American safety standards. - Features: - Better signal coverage - S2 authenticated security - SmartStart for easy pairing - Remember and restore on/off status - Auto-on and auto-off timers (if hub supports advanced settings) - ETL certified - Conforms with North American safety standards

Hub Compatibility

This is an advanced Z-Wave device, requiring an open Z-Wave hub to display correctly. It works well with Hubitat, Home Assistant, and HomeSeer (3.0.6.0 Z-Wave plug-in or higher). Compatible with SmartThings with a custom device handler (details available on Zooz support page). Not supported by ADT Pulse, Vivint, Wink, Ring, Alarm.com, or other panels. - ** Supported Hubs: - Hubitat - Home Assistant - HomeSeer (3.0.6.0 Z-Wave plug-in or higher) - ** Not Supported: - ADT Pulse - Vivint - Wink - Ring - Alarm.com