ZOOZ 700 Series Scene Controller for Z-Wave Hubagement

The Ultimate Product Guide

Smart Lighting Control and Scene Management

Connect a 120 V Light Fixture

Connect a 120 V light fixture (up to 150 W for LED's) to the ZEN32 Scene Controller. Control it via Z-Wave or use the main button for wireless control. Z-Wave hub required, sold separately.

Note:

Your smart speaker is NOT a Z-Wave hub.

4 Remote Buttons

Each of the 4 remote buttons can be programmed to activate scenes or other devices in your network for one-touch control. Use them to enter "Away" mode on your way out or to turn off all the lights before you go to bed with a single click.

Direct 3-Way Solution

No add-on switch needed! Works with regular 3-way switches as long as NEUTRAL is present. Wire it just like the ZEN71 model. Please follow the appropriate diagram in the manual and rewire both boxes exactly as shown. Works great as a single pole switch too!

Z-Wave Hub Compatibility

Most basic Z-Wave systems are not advanced enough to allow scene control programming. All Zooz devices work best with the Z-Box Hub. The ZEN32 Scene Controller is supported by:

• SmartThings (with a custom driver, instructions included with the product)
• Hubitat
• Home Assistant
• HomeSeer

Please do NOT buy this device if your hub is not listed here. It will not be recognized correctly by your system.

New 800 Series

Built on the latest 800 series Z-Wave chip, this product offers better signal coverage, faster communication, and S2 authenticated security. It supports the new Z-Wave Long Range technology as well as traditional mesh network.

Easy Installation

Clear diagrams and 7-day a week support are included. The device is only 1.1" deep, making it ideal for shallow and crowded switch boxes. NEUTRAL wire required (check before buying). The device conforms to North American safety standards and is ETL certified. Backed by a 1-year warranty, register your product for an extended 5-year warranty.