Zooz Z-Wave Long Range Relay for Home Automation | 2 x NO-C-NC Relays

Product Insights

Control 2 Dry Contact Relays Independently with One Z-Wave Device

With this smart Z-Wave device, you can control 2 independent dry contact relays with just one Z-Wave device. Choose from normally closed (10 A) and normally open (20 A) relays to automate almost any electrical device. You can connect an optional wall switch for physical on/off control or use your Z-Wave hub (required, sold separately) for wireless control. Your smart speaker is not a Z-Wave hub, and this product is not supported by Wink or Z-Wave alarm panels.

Smart Inputs for Monitoring

Monitor 12-24 V or dry contact inputs separately from the dry contact outputs. Connect analog binary sensors to receive status updates in your Z-Wave hub from a connected door sensor, water sensor, HVAC system, or alarm panel. Use the inputs to trigger the outputs automatically.

Automate Anything with Ease

Add Z-Wave connectivity to up/down DC motors in screens, motorized blinds, or awnings. Perfect for automating your garage door opener (use a single ZEN17 to control up to 2 garage doors independently), commercial gates, gas fireplace, sprinklers, doorbell, outdoor lighting, pool pump, whole house fan, and any 1-240 V device up to 20 A.

Quick Installation

Power it with a 12-24 V AC/DC power source or a standard USB C cable (included) and a power supply (sold separately). Wall-mount ready. Jumper wires are not included. Do not power with 110 V!

Advanced Features

Enjoy better signal coverage and stronger Z-Wave repeater performance with the latest 800 series chip. Long Range ready if your hub supports this feature! It comes with S2 authenticated security and SmartStart for easy pairing. The device remembers and restores on/off status after power failure. Built-in auto-on and auto-off timers are available with advanced settings support. This device is ETL certified and conforms to North American safety standards.

Hub Compatibility

This is an advanced Z-Wave device and requires an open Z-Wave hub to display correctly. It was tested to work well with Hubitat, Home Assistant, HomeSeer (on 3.0.6.0 Z-Wave plug-in or higher), and is compatible with SmartThings with a custom device handler (please go to Zooz support page for details). It is not supported by ADT Pulse, Vivint, Wink, Ring, Alarm.com, or other panels.